M.Tech Admission 2013-14 Chemical
Engineering
GATE 2013-14 M.Tech. Admission 2013 Counselling & Guideline
forChemical Engineering ( CH )
You must choose these specialization preferences for M.Tech
admission 2013:
o Process Modelling
o Simulation
o Computer Aided Design
o Optimization &
control
o Particulate Systems
o Fluid Mechanics
o Separation Process
o Petrochemical
o Electrochemical
processes
o Thermodynamics
o Colloid &
Interfacial Science
o Microstructure Engg.
o Supercritical Fluid
Extraction
o Membrane Processes
o Environmental
Engineering
o Bioprocess
engineering and food engineering.
Selection Factors:
1. Rank / Score category-wise obtained in GATE 2013
2. Percentage in B.Tech/ B.E.
3. Written Test (Institutes)
4. Interview
1. Rank / Score category-wise obtained in GATE 2013
2. Percentage in B.Tech/ B.E.
3. Written Test (Institutes)
4. Interview
o In Case of GATE Score : The GATE score is
given 70% weight age and remaining 30% Weight age is for the written test /
Interview. The exact ratio may differ so before you apply just verify once
through official notification.
IIT Roorkee : GATE 2011 cutoff : 76.33
IIT Roorkee : GATE 2012 cutoff : 73.33
IIT Delhi : GATE 2013 cutoff : Chemical Engineering : General 496 OBC 480 SC 403 ST 344 PD 344
GATE 2013 Cutoff for NIT Warangal : General 352 OBC 328 SC 305 ST 300
For general category candidate below are Rank division and possible specialization:
IIT Roorkee : GATE 2012 cutoff : 73.33
IIT Delhi : GATE 2013 cutoff : Chemical Engineering : General 496 OBC 480 SC 403 ST 344 PD 344
GATE 2013 Cutoff for NIT Warangal : General 352 OBC 328 SC 305 ST 300
For general category candidate below are Rank division and possible specialization:
IITs : GATE score is given a minimum weight of 70% in judging the overall performance of the candidates appearing for interview at IITs.
RANK upto 200 : Interview call from applied PSU’s.
RANK upto 400 to 600: IITs & NITs.
Rank 600 to 800: All NITs, deemed universities, Top colleges like BHU, NSIT (with interview and written test).Other Universities like JNTU, Osmania etc.
Rank 800 to 1100: For such candidate good level of private engineering colleges are best option where admission are direct or through ( Written with interview ). BITs, Pilani, Anna University, PSG, Coimbatore, Anna University, Pondicherry university, UPTU, Punjab Tech. University, MDU
For SC/ST/OBC category candidates seats are reserved with lower Rank at almost IITs, NITs and reputed institute. ( For rough calculation of rank distributions ( SC/ST : General Rank+600) ( SC/ST : General Rank+400)
Preference of IITs : IIT Delhi / Kanpur / Madras / Bombay / Kharagpur / Roorkee / Guwahati
Preference of NITs : Trichy / Warangal / Calicut / Suratkal / Allahabad / Hamirpur / Rourkela / Bhopal / Jamshedpur / Surat / Jaipur / Kurushetra / Durgapur /Nagpur / Patna / Raipur / Jalandhar / Agartala / Silchar / Srinagar
Stipend / Scholarship for M.Tech Students: The stipend/Scholarship is awarded by reputed institution; you may verfy at the time of admission.
Non- Stipend seats for M.Tech: Certain seats are available at IITs, NITs, & reputed colleges for Non- Stipend, In this category all expenses are borne by students only. In this case a student may get good specialization so if you are financially sound then you must try in case your gate score is low.
Our suggestion to gate qualifiers:
o First select suitable
Specialization with proper selection of college as per your rank or gate score.
o It is strongly
advised to apply more than three options as other factor (No. of Applicants,
left seats with Higher score/ luck factor) may keep you in safe side.
o If you have got
relatively low scores in the GATE 2013 then apply at colleges suitable to your
score and apply at those colleges where written / Interview selection are
preferable.
o To know the
updates of reputed institution you must check any such update at their
respective website or leading newspapers.
o Before you apply at
any institute ensure all eligibility condition and must go into detailed of
information brochure of each college.
o If you got admission
update us your GATE Score with details of specialization and college allotted
In case of any assistance or your queries are welcome.
Hi,
ReplyDeleteGATE Instructors is a comprehensive classroom study programme for the preparation of GATE.
thnx for the above article it was really helpful and informative.however i would like to advice all GATE coaching aspirants to do consider the online coaching option too as they do provide the same material and tips & tricks and u can start the online session acc. to your convienence plus it's available at a much lower price than the offline coaching.practicing with test’s regularly could easily double your efficiency.but i do believe that in today’s scenario for Proper preparation and development of concepts one must join some GATE coaching classes.i have also joined @http://www.wiziq.com/course/9577-crack-gate-mechanical-engineering-with-full-syllabus-preparation .really useful course and a must for every GATE aspirant.
ReplyDeleteLarge number of candidates take these exams, competing for limited posts.Both Objective & Conventional Sections will cover the entire syllabus of the relevant engineering disciplines viz. Civil Engineering, Mechanical Engineering, Electrical Engineering and Electronics & Telecommunication Engineering.
ReplyDeleteMinimum qualifying marks has to be obtained in Objective type papers for checking conventional papers.
IES cutoff marks are available at website. You may contact student counselor in case you need any such data related to ES examination, IES cutoff, IES Question papers, IES solution, IES interview question.IES 2013 examination pattern are same as IES 2012, Examination difficulty level, cutoff and paper pattern are almost same.
Gate Coaching
IES coaching